Aggressor™ Manual Edge Profile Tooling - Continuous

• More aggressive, super fast cutting and long lasting
• Fits Master, Sector and all popular portable routers
• Pos. 2 (fine grit) recommended for better polish
• Custom-made profiles available upon request
• 5mm-high diamond segment (breakers only)

Description	Item #
Profile A
2cm P1 C MSL	633101
2cm P2 C MSL	633102
Profile B
2cm P1 C MSL	633161
2cm P2 C MSL	633162
3cm P1 C MSL	633171
3cm P2 C MSL	633172
Profile F
2cm P1 C MSL	633221
2cm P2 C MSL	633222
3cm P1 C MSL	633231
3cm P2 C MSL	633232
Profile H
2cm P1 C MSL	633281
2cm P2 C MSL	633282
3cm P1 C MSL	633291
3cm P2 C MSL	633292
Profile V
2cm P1 C MSL	633401
2cm P2 C MSL	633402
3cm P1 C MSL	633411
3cm P2 C MSL	633412
4cm P1 C MSL	633421
4cm P2 C MSL	633422
Replacement Bearing w/ Sleeve	633999
Profile B&B
3cm P1 C MSL	633471
3cm P2 C MSL	633472
Single Breaker	633991
Double Breaker	633992

---------------------------------------------------------------

Zero Tolerance Cutters for the Scorpion Fabrication Center

Description	Item #
Coarse	29906
Fine	29907
Bowl - Coarse	29916

---------------------------------------------------------------

Cyclone Zero Tolerance Wheels • The most popular tool for truing vanity countertops • 5/8-11 threaded with center water feed • Available with resin to reduce vibration or segmented to remove stock more aggressively • All Cyclone Zero Tolerance Wheels are balanced to eliminate vibration • Recommended use: Osculate wheel up and down to wear evenly and avoid grooves

Description	Thread Type	Item #
1 x 1 5/8" (non-resin)	5/8-11	29920
2 x 1 5/8" (resin)	5/8-11	29922
2 x 1 5/8" (non-resin)	5/8-11	29923
3 x 1 5/8" (resin)	5/8-11	29924
3 1 5/8" (non-resin)	5/8-11	29925

--------------------------------------------------------------

Cyclone Stock Removal Drum Wheels





• 5/8-11 threaded
• Zero vibration
• Recommended use: Osculate wheel up and down to wear evenly and avoid grooves

Description	Item #
2 x 2" - 36 grit	29930
2 x 2" - 60 grit	29931
2 x 2" - 120 grit	29932

---------------------------------------------------------------

Alpha® Profiler


The Alpha® Profiler is designed to produce a roundover on granite,
engineered stone and porcelain tile and slab. The wheel has a 5/8”-11 female thread and water holes to be used with waterfeed grinders. Maximum rpm: 3,500. Top and bottom guides maintain accuracy of profile.

Description	Item #
3/8" Profile Wheel	29080
3/4" Profile Wheel	29083

---------------------------------------------------------------

Alpha® Profiler E-Series

Be the first in your field to take advantage of the new technology and design for edging countertops, sink rims, window sills, steps and door saddles. The Alpha® Profiler E-Series is designed to create a Hollywood Bevel edge that will put you way ahead of the competition.

Description	RPM	Arbor	Item #
1" 20° Bevel	3,500	5/8-11 threaded	30092

---------------------------------------------------------------

Alpha Profiler - F Series

Alpha® introduces a new addition to the Profiler Series with the Profiler F, commonly known as Ogee. The F Series is a two-step process to make your operation easier. Position 0 breaks the corner fast while Position 1 completes the Ogee profile. This process is designed to eliminate the use of a router and can easily be used on a hand polisher

Description	RPM	Arbor	Item #
3/4" (2cm) Pos. 0	3,500	5/8-11 threaded	29092
3/4" (2cm) Pos. 1	3,500	5/8-11 threaded	29093

--------------------------------------------------------------

Alpha® Profiler V-30

The unique wheels are designed for bullnose edge profiling that will eliminate the time-consuming calibration process. Will work on all popular water-fed polishers.

Description	RPM	Arbor	Item #
1 1/4"	3,500	5/8-11 threaded	29086

--------------------------------------------------------------

Alpha® Profiler Z Series

The Alpha® Profilers are vertical grinding wheels that has a very
aggressive cutting performance and its original shape for a long time.

Description	RPM	Arbor	Item #
Z-30	3,500	5/8-11 threaded	29090

--------------------------------------------------------------

Cyclone Drum Polishers

Cyclone Drum Polishers are great for polishing vanity bowls and sink cut outs. They come with convenient 5/8” thread and are to be used with water. These polishing drums are available from 50 grit to a final buff polisher and leave an incredible finish in the hard to reach areas.

Description	Item #
2 x 2"
50 grit	32200
100 grit	32201
200 grit	32202
400 grit	32203
800 grit	32204
1,500 grit	32205
3,000 grit	32206
Black	32207
White	32208

--------------------------------------------------------------

Scorpion Bowl Polishing Drums




Oscillating bowl polishing drums for use on the Scorpion Fabrication Center.

Description	Item #
400 grit	18503.253
800 grit	18503.254
1,500 grit	18503.255
3,000 grit	18503.256
Oscillating Head	18503.257
Adapter 1/2 gas - 7/8 - 10mm	18503.251

--------------------------------------------------------------

Cyclone Oscillating Drums






• 3 inch sink polishing system for radial arm machines
• Twist-on system makes it easy to use on most machines
• Achieve a superior finish with new hexagon tread pattern

Description	Item #
50 grit	32330
100 grit	32331
200 grit	32332
400 grit	32333
800 grit	32334
1,500 grit	32335
3,000 grit	32336
Black Buff	32337
White Buff	32338

--------------------------------------------------------------

Scorpion Fabrication Center Accessories

Diamond Turbo Tip for smooth cutting of bowl holes on the VIC Scorpion and similar machines.  Diamond on all sides allows this bit to do cut outs more quickly and without using a blade and hand tool first.  Available in regular bond for most stones, medium bond should be used on stones that chip easily

Description	Item #
Router - Turbo Tip - D20 Red	402503
Router - Turbo Tip - 20 x 20 - Silver	402505
Router - Turbo Tip - 20 x 20 - Blue (soft bond)	402506
Tool Holder	18503.101
Econo Tool Holder	18503.099