Groves Dumpster

• Convenient lever action, assures safe dumping.

• 4,000 Lb capacity

• Continuous length fork lift tubes add stability when unloading.

• Heavy duty construction - unit is made with 1/4” steel plate

• Dumpster has 1 cubic yard of capacity.

• Optional 8” x 2” casters, two swivel with brake and two rigid, improve mobility.

Groves Tilt Table Cart

• Dual purpose work bench and transport cart

• Adjustable length material stops

• Adjustable height 36” to 42”

• Four swivel 5” diameter casters, 1,000 lb. capacity

• Four heavy duty foot operated locks to prevent movement while fabricating

• Hot dip galvanized

• Ships knocked down for freight savings

Groves Fabrication Table

Groves Aluminum Install Cart

Groves Adjustable Working Table

Groves Slings for Stone 

Groves Spread Beams for Stone 

Groves Single Sided Rack 

Groves Heavy Duty Transport Rack - 4,000 lbs. 

Groves Heavy Duty Transport Rack - 10,000 lbs. 

• 10,000 lb capacity (without casters) to hold all sizes of slabs

• Caster package consist of 8” diameter roller bearing wheels rated at 2,000 lbs each. Two swivel casters with brakes on one end and two rigid on the other

• Lift with overhead crane using four base mounted lifting rings. Four hold down ratchet straps secure load.

Groves Fab Stand 

•  Fabrication stand can be used in the shop or on the job

•  Adjustable to any height from 40” to 45”

•  Stackable for transporting or storage

•  Rubber mounted on top prevents sliding and scratches

•  Set up your entire job to ensure correct fit to templates and continuity of polish

Groves Econo A-Frame 

• Heavy duty, 146 lb. steel A-frame rack

• Holds up to 12,000 lbs. per side

• 60” L x 60” W x 58” H with 6” spread on top of A

• Ships knocked down for freight savings

Groves Slap Top A-Frame 

• Designed to hold prefabricated slab tops

• Ideal for holding manufactured kitchens

• Rubber is mounted on the base and the uprights to help protect product

• Can be used with pallet racking to maximize storage

Groves Single Sided Shop Cart 

• Holds fabricated parts

• Easy clean-up with hose

• Removable top A-frame for economical shipping

• 7” ledge length

• 10” diameter pneumatic tires

• 5” diameter swivel locking casters

• 2,000 lb. capacity

• 40” L x 24” W x 26” load height

Groves Truck Mounted
A-Frame 

• 24,000 lb total capacity. Hold up to 12,000 lbs. per side

• Six mounting plates used for bolting to truck or trailer

• Bottom U-channel is 4” wide with 2” side ledges and is designed to hold wood 4x4’s to support the load. Customer furnishes wood

• Rubber-lined uprights help prevent scratches

• Removable X and cross braces bolt together for ease of transporting and reduces shipping cost

•  Galvanized finish for long lasting durability

Groves Heavy Duty Shop Cart

• Rugged 2,500 lb capacity (HDSC48) and 4,000 lb capacity (HDSC8448 and HDSC8472)

• Rubber is mounted on bottom and upright support

• Four ratchet hold down straps secure load

• 5” diameter casters rated 1,000 lbs each. Two rigid and two swivel with brake (HDSC48)

• 8” diameter casters rated 1,000 lbs each. Two rigid and two swivel with brake (HDSC8448 and HDSC8472)

• Galvanized finish for long lasting durability

Groves Stacking Racks

Designed to be stacked three high with stationary bottom. Wheels can only be used when not stacked. Maximum capacity is 3,000 lbs. total. One rack can hold 3,000 lbs. If stacked three high, each rack can hold 1,000 lbs.




•  Storage of remnants, cut offs strips and cut to size pieces

•  Job site cart for safe transport and handling of countertops, vanity tops, saddles, sills, and stair treads

•  Removable front legs for easy hand loading and unloading

•  Hold down bars to secure the material to the box and prevent damage in transport

•  Cable hooks for crane handling

•  5” diameter Casters, two rigid and two swivel

•  48 1/2” overall height with Casters, 24” load height

Groves Display Rack

• 3,000 lb. capacity, 350 lb. maximum per ledge

• Displays eight full size tops up to 3 cm thick

• Black enamel finish

• Use 1/2” holes located on the bottom for securing to the floor

Groves Flip Cart

• Allows vacuum cups to be moved from one side of the stone to the other.

• Ideal for removing stone from a bridge saw then flipping stone to the other side for placing on fabrication table.

• Removable 60” posts allow adjustable spacing between posts, from 3-1/2 to 10 inches apart.

• Holds up to 6 pieces of 3 cm stone.

• Rubber is mounted on bottom to protect material.

• 5” diameter swivel casters with brake rated at 1,000 Lbs each.

Groves Bundle Rack BR-5: Up to 6,000 lb. Capacity

• Stores bundles or slabs up to 6,000 lbs. between posts (3,000 lb capacity per post)

• Outside rails are designed with slots to hold 2 x 4’s

• 2 x 4’s protect the slab edges and the finish on the rails

• 11” wide x 5 1/2” high x 60” long rails butt together for desired length

• Outside rails have 2” square holes spaced 4” apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1” up from the bottom

• Hot dip galvanized finish on rails

• 2” square tubes posts are coated with a red baked enamel primer finish

• Optional 2” square rubber post caps are used to prevent scratches

• Rails shipped with 11” connector tube for butting rails together in a straight line

SAFETY WARNING: Use 1/2” holes located on bottom flange for securing rails to the floor.

Groves Jumbo Slab Rack HDBR-5: Up to 9,000 lb. Capacity

• Designed for jumbo size stone bundles. Holds up to 9,000 lbs between two posts. Maximum weight is 4,500 lbs.

• Outside rails are designed with slots to hold 2 x 4’s

• 2 x 4’s protect the slab edges and the finish on the rails

• Galvanized rails 11” wide x 5 1/2” high x 60” long rails butt together for desired length

• Outside rails have 2.5” square holes spaced 4” apart on the top. A steel plate with identical holes is welded and boxed inside the rails, 1” up from the bottom

• Hot dip galvanized finish on rails


• 2.5” square tubes posts are coated with a red baked enamel primer finish

• Optional 2” square rubber post caps are used to prevent scratches

• Rails shipped with 11” connector tube for butting rails together in a straight line

SAFETY WARNING: Bottom rails must be bolted to the floor for safety

SAFETY WARNING: Maximum weight allowed per bundle is 9,000 lbs (4,500 lbs per post)

Cut Out Stand

•  Designed to support sink cutouts during fabrication.

•  12" x 12" base to support material

Groves Slab Dollies

•  Neoprene is easy to clean, prevents slippage and lasts for years

•  Ideal for moving drops and cut size pieces

•  Maneuvers easily indoors and outdoors

•  10" pneumatic tires, 4" swivel casters up to 1,000 lb. capacity

•  Ideal for use on job sites with narrow widths and tight turning radius

Groves 6 Wheel Fabrication Cart

The six wheeled design – 2 fixed, 4 swivels – gives our new fabrication carts incredibly tight turning radiuses to maneuver around your facility.  Available in 48” and 82” lengths, they feature galvanized steel and heavy duty casters and wheels, industrial rubber padding and welded construction.  Designed with an elevated ergonomic load height to reduce back strains, Groves Fabrication carts take the pain out of moving fabricated parts from one location to another.  Unlike other brands, Groves Incorporated’s fabrication carts are specifically designed to handle the demands of the Stone Industry.    Nothing else will last as long, or secure your materials better.