Pro Series VCH Metal Bond Tooling

6 grit VCH-CR1 Hunter #15217
The very aggressive CR1 diamond segment is designed to remove coatings 20 mils or more in thickness and also for use in stock removal applications. Due to the diamond particle size, a heavy profile will remain.

16 grit VCH-CR2 Burgundy #15218
A diamond segment designed to remove coatings from 10-20 mils in thickness. Also ideal for use after scarifying or shot blasting to level the marks and prepare the floor for further applications. Leaves a typical acid etched profile.

40 grit VCH-101 Navy #15216
Used for the removal of thin coatings, typically 10 mils or less. They leave behind a profile that is ideal for the application of new thin mil coatings.

80 grit VCH-102 Yellow #15223
Used on new concrete polishing and when VCH-101 is too aggressive. Ideal for preparation for acid staining.

150 grit VCH-103 Red #15219
Excellent for dry grinding removal of the scratches left by the VCH-101when used in polishing applications. It leaves the surface smooth with very few scratches. An important grit in the dry polishing process and reduces the need for resin bond diamonds.

300 grit VCH-104 Brown #15220
Utilized in our dry polishing process to remove scratches created by the VCH-103 leaving a uniform scratch free surface. May reduce or eliminate the need for initial resin bond diamond and thus reduce the cost per square foot for polishing.
 

User Benefits and Performance Features
• Aggressive cutting action
• Extended life to reduce cost per square foot
• Available to fit most competitors machines on the market
• Estimated rate of 10,000 sq. ft. diamond life on all the above VCH metal bond diamonds-Production numbers may vary according to surface conditions, diamonds used, machine operator, etc.

Contractor Series Metal Bond Tooling

The Contractor Series Metal Bond Diamonds offer longer life than similar metal bond tools on the market. These tools feature a segment height that is 2 times taller than other metal bond tools offered at the price point

	40 Grit Metal Bond Diamond This 40g diamond is aggressive enough to remove coatings up to 10 mil, yet leaves a profile that is ideal for the application of new thin mil coatings or as a first step in concrete polishing. Can be used as the first step in polishing concrete.
	80 Grit Metal Bond Diamond Used as a first step on new, hard troweled or flat concrete, the 80g leaves a surface that is ideal in preparation for acid staining or to open up the concrete for maximum penetration of densifiers.
	150 Grit Metal Bond Diamond This 150g diamond is essential before starting the resin steps in concrete polishing. Provides a smooth and uniform surface with very little scratch pattern.

SuperAbrasive 9" Metal Plate - 3 Button

Formulated for soft concrete applications, the 9 inch LAVINA™ plate is a disposable system featuring 3 buttons. The 3 buttons plate is very aggressive.

Husqvarna Metal Bond Tooling - Redi Lock™


Husqvarna offers a complete range of metal bonded diamond tools for every application.






Applications:
• aggregate exposure
• preparation of floors for tiles
• floor preparation for epoxy coatings and sealers
• flattening of concrete